36 8 If the Operating Mode of the controller is [Run], select [PLC] - [Operating Mode] - [Program] from the menu bar. 9 The dialog shown on the right will be displayed. Click [Yes]. Make sure that the mode is changed to Program mode, as shown in step 7. 10 Double-click "New Protocol List" in the project workspace to open the tree. 11 The project window shown on the right will be displayed. Make sure that [SCU[0]] is entered in [Target]. * If [SCU[0]] is not already entered, select [SCU[0]] as shown on the right. 12 With "New Protocol List" selected, from the menu select [Protocol] - [Download Protocols]. 13 The dialog on the right is displayed.
Check Include Source Information, and click Compile.