2. Before You Begin 2.1. Wiring the Devices and Installing the Software You wire the devices and install the software on the computer as described in 1.1. System Configuration and Configuration Devices . Additional Information Refer to the manuals for the devices that are used in the system for wiring of the devices. Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for installation of the Sysmac Studio. Access the website of The MathWorks Inc. or refer to the MATLAB & Simulink Installation Guide that is provided by The MathWorks Inc. for installation of MATLAB/Simulink and Simulink PLC Coder.
You make the MATLAB environment settings for using the linked functions of Simulink and Sysmac Studio according to the following procedure. 17 1 Start the MATLAB and select the MATLAB folder in the directory where the Sysmac Studio is installed as the Current Folder. (The default installation folder is C:\Program Files (x86)\OMRON\Sysmac Studio\MATLAB.)