Introduction The NJ/NX/NY-series Controller Startup Guide for Simulink ® and Sysmac Studio (hereinafter, may be referred to as “this Guide”) describes the startup procedures that are required to use a combination of Simulink ® from The MathWorks ® Inc. and the NJ/NX/NY-series Controller for the first time and the basic operating instructions for the Sysmac Studio. A simple single-axis positioning example is used for the discussion. You can perform the procedures that are presented in this Guide to quickly gain a basic understanding of the combination of Simulink ® This Guide does not contain safety information and other details that are required for actual use.
and the NJ/NX/NY-series Controller. Thoroughly read and understand the manuals for all of the devices that are used in this Guide to ensure that the system is used safely. Review the entire contents of these materials, including all safety precautions, precautions for safe use, and precautions for correct use. This guide is intended for the following personnel. • Personnel in charge of introducing FA systems • Personnel in charge of designing FA systems The personnel must also have the following knowledge. • Knowledge of electrical systems (an electrical engineer or the equivalent) • Knowledge of MATLAB ® /Simulink ® from The MathWorks ® Inc.
• Knowledge of the NJ/NX/NY-series Controller • Knowledge of operation procedure of Sysmac Studio This guide covers the following products. • CPU Units of NJ/NX-series Machine Automation Controllers • Industrial PC Platform NY-series IPC Machine Controller • Sysmac Studio Automation Software • MATLAB ® /Simulink ® from The MathWorks ® Inc. • Simulink ® PLC Coder™ from The MathWorks ® Inc. The icons that are used in this Guide are described below. Precautions for Correct Use Precautions on what to do and what not to do to ensure proper operation and performance. Additional Information Additional information to read as required.
This information is provided to increase understanding or make operation easier. 1 Intended Audience Applicable Products Special Information