3.2.5. Setting the Axis You add an axis to control the Servo Drive, assign the Servo Drive to the axis, and make the axis parameter settings. 30 1 Double-click Motion Control Setup in the Multiview Explorer and right-click Axis Settings and select Add - Axis Settings from the menu. 2 Double-click MC Axis000(0) (Axis 0) that was added under Motion Control Setup - _ Axis Settings in the Multiview Explorer to display the axis parameter setting view. 3 Make the Axis Basic Settings as shown below to assign the Servo Drive to the axis. Axis type: Servo axis Output device 1: Node: 1 R88D-KNA5L-ETC(E001)