Troubleshooting Solving Problems Keyboard, Mouse, and TouchPad Problems If the pointer is difficult to control • Adjust the pointer settings using the Mouse icon in Control Panel. If the TouchPad doesn’t work • Make sure you don’t have an external mouse connected to the OmniBook. • If you just disconnected an external mouse, try exiting and restarting Windows to make the OmniBook TouchPad active again. • Press the blue power button to suspend the OmniBook, then turn it on again without moving the pointer. • Reset the OmniBook. If the embedded numeric keypad doesn’t work • Press and hold the Fn key to temporarily access the embedded keypad.
If a PS/2 keyboard and mouse with Y-adapter don’t work • This configuration is not supported. (You can use a port replicator or a serial mouse.) If you have problems with the TouchPad response • Check settings in Control Panel. 8-6