Troubleshooting Solving Problems If the secondary battery doesn’t charge • The OmniBook’s secondary battery doesn’t charge until the main battery is fully charged. If the OmniBook stops responding • Press the blue power button and wait a few moments until the icons on the status panel stabilize. Then press the blue button again to turn the OmniBook back on. If necessary, press CTRL+ALT+DEL to reboot. • If nothing happens, insert a paper clip into the system-off button on the back side of the OmniBook, between the parallel and VGA-out ports.
If the OmniBook doesn’t suspend automatically • If you have a connection to another computer, the OmniBook doesn’t suspend if the connection is actively in use. • Check the time-out settings in the BIOS Setup Utility. Make sure the Suspend time-out is enabled. If the OmniBook doesn’t suspend immediately • If the OmniBook is performing an operation, it normally waits for the operation to finish. 8-11