To remove a PC Card Caution Never remove an I/O card while an application is open that’s set up to use that card. Exit the application first. If you remove the card, the application (or the OmniBook) might behave unpredictably or stop responding until you reset the OmniBook. Never insert or remove a plug-in card while the PC Card drive is actively reading or writing data. Check the PC Card indicator in the status panel and wait until the PC Card drive is done. Otherwise, you could lose data or the OmniBook could stop responding. 1. Stop the PC Card by clicking the PC Card indicator in the taskbar, then clicking Stop. This protects your data and avoids unexpected problems.
You can restart the card by removing it, then inserting again. 2. Press the ejector button once to pop it out, then press it again to pop the card out. To insert and remove a CD When the OmniBook is reading data from the CD-ROM drive, the CD-ROM/hard disk drives indicator appears on the status panel. Caution Do not insert or remove a CD while the OmniBook is actively reading data. Wait until the CD-ROM drive is done. Otherwise, the OmniBook could stop responding. 1. Press the button on the face of the CD-ROM drive (on the right side of the OmniBook). 23