Starting Out with Your OmniBook Special Features Replacing the Hard-Disk Drive You normally don’t remove drive C, the main internal disk (also called the “hard- disk drive”). The two main reasons to replace drive C are for upgrade and for repair. C A U T I O N Back up your files before replacing the drive. Take precautions against damage from static electricity. Gather all the parts you need so you can complete the installation in one sitting. Don't remove the drive from its packaging until you're ready to insert it. When you remove the drive from its packaging, hold it only by its edges. Turn off the computer, unplug the ac adapter, and remove the battery before removing the hard drive.
Otherwise, the OmniBook or the hard drive may be damaged. 1. Back up all the files on your current drive C. You can back up the files to a tape drive, a network drive, a PC card, or a floppy disk. In Windows95, use the Backup utility (Start, Programs, Accessories, System Tools, Backup, Backup tab). In Windows for Workgroups, you must back up individual files (File Manager) or use a commercial back-up program. 2. Important: Turn off the unit, unplug the adapter, and remove the battery. 3. Close the cover and turn your computer over. Using a Torx-T6 screwdriver, remove the five screws holding the hard drive and the keyboard in place (the exact locations vary with the type of hard drive). 1-24