Starting Out with Your OmniBook Setting Up the OmniBook To use the mouse The mouse is extremely sturdy. Its flexibility allows it to withstand bending and accidental bumps without breaking. 1. Eject the mouse. • Press the round mouse-eject button in the upper-right corner of the keyboard. • Firmly pull the mouse out past the first resistance to its full extended position—about 3 inches (8 centimeters). • Lift the near end of the mouse—it pops up for a more comfortable shape. Although the arm limits the physical extension of the mouse, it does not limit the travel of the pointer, as you will see. Just by pushing or pulling on the pointer, the pointer will continue to travel. 2.
Calibrate the mouse. When you turn on the OmniBook, you might notice that the mouse needs to re- calibrate itself—that is, it needs to redefine its margins. • Simply push or pull the mouse against one vertical limit—and then one horizontal limit—until the pointer on the screen travels to the edge of the screen. 3. When done, store the mouse. • If the mouse is popped up, press inward on the support arm and press the raised end of the mouse downward to collapse it. • Gently push the mouse into the case opening until it latches. 1-9