Quick Start Instruction E5CC OMRON 1.4 Change alarm type The E5CC has 3 alarm outputs. These can be used to switch to an output when a specific value is reached. Some options: Option 1: Alarm when the temperature rises 5 degrees above the set value. Option 2: Alarm at fixed value, for instance 150 degrees. These are two different alarm types. There are 19 alarm types in total, see Figure 8. For instance, if you want an alarm to activate at a fixed temperature (absolute value), then change the alarm type . An absolute upper limit is found at value 8. In Figure 8 all alarm types are organized in a table. If you wish to change the alarm type, follow these steps: 1.
Press and hold the 1st button for 3 seconds until in-t is displayed. 2. With the 2nd button scroll through the parameters until you reach alt1 (Alarm type 1). 3. Enter a number with the arrow buttons, referring to Figure 8. This will be the desired alarm type. Caution: You have not set an alarm value yet. This is covered in Section 1.4.1 13