1. If using a PoE Injector, connect an Ethernet cable from the PC NIC to the port labeled “IN” on the injector and connect an Ethernet cable from the “OUT” on the injector to the camera. If using a PoE switch, connect the Ethernet cable to the camera and to a PoE port on the switch. Configure the PC NIC Card for GigE Vision Multiple NIC settings must be set correctly to maximize system performance. These include using one NIC Port per camera, as well setting each NIC to use Jumbo Packets, Maximum Receive Buffers, and Interrupt Moderation. Each of these settings will be described below. 1. Click Start. 2. Click Settings. Omron Automation Americas 8