Remove lower output delivery rollers Step 1 Remove the following assemblies: • Remove the toner cartridge. See “Toner cartridge removal and replacement” on page 96. • If installed, remove tray 3. See “Remove tray 3” on page 97. • Remove the cassette from tray 2. See “Remove the cassette from tray 2” on page 97. • Remove the DIMM cover. See “Remove DIMM cover” on page 99. • Remove the rear cover. See “Remove rear cover” on page 100. • Remove the top cover. See “Remove top cover” on page 102. • Remove the left cover. See “Remove left cover” on page 105. • Remove the upper output delivery roller. See “Remove upper output delivery roller” on page 125.
Step 2 Rotate the rollers (callout 1) up to the vertical position (away from the laser/scanner), to unseat the roller spring. Step 3 Push down to disengage the pivot pins of the rollers. Step 4 Lift out the rollers. 21 Figure 98. Remove lower output delivery rollers Note When replacing the lower output delivery rollers (callout 1), remove the roller springs for use with the new rollers. CAUTION When installing the lower output delivery rollers (callout 1), verify that the two middle rollers are equipped with the additional lower wheels. C7058-90936 Internal disassembly and assembly 127