Remove duplexer reverse motor Step 1 Remove the following assemblies: • Remove the toner cartridge. See “Toner cartridge removal and replacement” on page 96. • If installed, remove tray 3. See “Remove tray 3” on page 97. • Remove the cassette from tray 2. See “Remove the cassette from tray 2” on page 97. • Remove the DIMM cover. See “Remove DIMM cover” on page 99. • Remove the rear cover. See “Remove rear cover” on page 100. • Remove the top cover. See “Remove top cover” on page 102. • Remove the ribbon cable harness. See “Remove ribbon cable harness” on page 132. Step 2 Remove the two duplexer reverse motor mounting screws (callout 1). Step 3 Lift off the motor. 21 Figure 106.
Remove duplexer reverse motor C7058-90936 Internal disassembly and assembly 133