Remove tray 1 separation pad assembly Step 1 Remove the following assemblies: • Remove the toner cartridge. See “Toner cartridge removal and replacement” on page 96. • If installed, remove tray 3. See “Remove tray 3” on page 97. • Remove the cassette from tray 2. See “Remove the cassette from tray 2” on page 97. • Remove the DIMM cover. See “Remove DIMM cover” on page 99. • Remove the rear cover. See “Remove rear cover” on page 100. • Remove the top cover. See “Remove top cover” on page 102. • Remove the left cover. See “Remove left cover” on page 105. • Remove tray 1. See “Remove tray 1” on page 106. • Remove the tray 1 pickup roller assembly. See “Remove tray 1 pickup roller” on page 140.
Step 2 Rotate the separation pad fully forward. Step 3 Gently squeeze the mounting feet of the assembly to release it from the pivot pins. Step 4 Lift off the tray 1 separation-pad assembly. Step 5 If required, remove the single separation-pad mounting bracket mounting screw and remove the mounting bracket. Figure 120. Remove tray 1 separation-pad assembly C7058-90936 Internal disassembly and assembly 145