Remove tray 1 solenoid Step 1 Remove the following assemblies: • Remove the toner cartridge. See “Toner cartridge removal and replacement” on page 96. • If installed, remove tray 3. See “Remove tray 3” on page 97. • Remove the cassette from tray 2. See “Remove the cassette from tray 2” on page 97. • Remove the DIMM cover. See “Remove DIMM cover” on page 99. • Remove the rear cover. See “Remove rear cover” on page 100. • Remove the top cover. See “Remove top cover” on page 102. • Remove left cover. See “Remove left cover” on page 105. • Remove the formatter PCB. See “Remove formatter PCB” on page 112. Step 2 Trace the two-pin solenoid wire harness (callout 1) and unplug it from the connector.
• Remove the printer drive assembly. See “Remove printer drive assembly” on page 134. Step 3 Unlace the wire harness from the loops. Step 4 Remove the mount screw (callout 2). Step 5 Lift off the tray 1 solenoid. 2 2 2 1 Figure 123. Remove tray 1 solenoid 148 Chapter 6 Removal and replacement C7058-90936