Remove tray 3 (250-sheet feeder) feeder drive assembly Step 1 Remove the following assemblies: • If installed, remove tray 3. See “Remove tray 3” on page 97. • Remove the cassette. See “Remove tray 3 (250-sheet feeder) cassette” on page 166. Step 2 Place the sheet feeder top-down with the front facing outward. Step 3 Use a small flatblade screwdriver to disengage the cover’s locking tabs (callout 1). Step 4 Lift the cover off the cassette. 21 Figure 148. Remove tray 3 (250 sheet-feeder) drive cover 168 Chapter 6 Removal and replacement C7058-90936