Note The printer supports a wide range of media sizes. Check the printer software for supported sizes. Capacity can vary depending on media weight and thickness and on environmental conditions. Smoothness should be between 100 and 250 (Sheffield). For information about measuring basis weight, see "Basis-weight field test" on page 37. For information about measuring caliper, see "Caliper field test" on page 39. For information about smoothness, see "Paper-finish field test" on page 39. Tray 1 media sizes Tray 1 adjusts for sizes from 76 by 127 mm (3 by 5 in) to 216 by 356 mm (8.5 by 14 in). Send media from tray 1 to the rear output bin when printing on the following:
envelopes labels transparencies custom-sized media or cardstock postcards Table 10. Tray 1 media sizes Note Users might experience jams when using any media with a length less than 178 mm (7 in). This can be caused by paper that has been affected by environmental conditions. For optimum performance, make sure that users are storing and handling the paper correctly. C7058-90936 Media specifications 31 Tray 1 Dimensions Weight Capacity Minimum size (custom) 76 by 127 mm (3 by 5 in) 60 to 163 g/m2 (16 to 43 lb bond) 100 sheets of 75 g/m2 (20 lb bond) paper Maximum size (custom) 216 by 356 mm (8.5 by 14 in) Transparency Same as minimum and maximum paper sizes listed above Thickness:
.10 to .14 mm (0.0039 to 0.0055 in) 75 typical Labels Thickness: .10 to .14 mm (0.0039 to 0.0055 in) 50 typical Envelopes Up to 90 g/m2 (16 to 24 lb) Up to 10