JetDirect configuration-page elements 1 General information lists the HP JetDirect number, firmware revision, LAN hardware address, selected port, manufacturing ID, I/O card status, and network statistics (unicast packets, total packets, bad packets, framing errors received, packets transmitted, unsendable packets, transmit collisions, and transmit late collisions). 2 Network statistics lists total packets received, unicast packets received, bad packets received, framing errors received, total packets received, unsendable packets, transmit collisions, transmit late collisions.
3 Protocol information lists TCP/IP status and configuration, the HP Web JetAdmin server name, Novell NetWare status and configuration, AppleTalk status and configuration, and DLC/LLC status. Continuous self test To initiate a continuous self test: Turn the printer power off. Press and hold G O . Turn the printer power back on and continue to hold G O until the Attention and Ready light turn on. Release G O . The Ready light blinks indicating the device is in continuous self test mode. The printer prints self test/configuration pages until J OB C ANCEL is pressed. 50 Chapter 3 Printer configuration C7058-90936