OT-MC20 User's Manual (EN)

User's Manual/Manuel d’utilisation/ Benutzerhandbuch/Gebruikershandleiding/ Manuale dell’utente/Manual de usuario/ Manual do utilizador/Navodila za uporabo/ Brugervejledning/Kдyttцohje/Brukermanual/ Bruksanvisning/Uživatelskб přнručka/ Felhasznбlyi kйzikцnyv/ ユーザーズマニュアル M00106100

Стр. 1

English

English Before Use This product is a charger specialized for the TM-P20 printer and OT-BY20 battery. Please read this manual and the manuals supplied with the TM-P20 printer and OT-BY20 battery carefully before using this product. Keep this manual at hand for immediate reference whenever necessary. Safety Precautions The symbols shown below are used in this manual in order to ensure safety and proper use of this product and to prevent danger to customers and other persons, and property damage. The symbols indicate the precaution levels as described below. Be sure that you completely understand their meanings before reading this manual. ! DANGER:

Handling the product improperly by ignoring this symbol can result in immediate danger of death or serious injury. ! WARNING: Handling the product improperly by ignoring this symbol can lead to death or serious injury. ! CAUTION: Handling the product improperly by ignoring this symbol can lead to injury and property damage. Cautions on Handling ! DANGER: Do not use or charge this product in high temperature places (60°C {140°F} or higher). Furthermore, do not leave or store this product in places that are 60°C {140°F} or higher. Doing so could lead to heat, smoke, ruptures, fire, or leaks. Be sure to use within the limits of the environmental temperature conditions. ! WARNING:

❏ Do not charge any device other than the TM-P20 printer or the OT-BY20 battery. Doing so may cause heat, explosion, fire, leaks, or other damage. ❏ Dispose of used battery according to the OT-BY20 User's Manual. ❏ Do not use this product in a location with volatile substances such as alcohol or paint thinner, or near fire. Doing so may cause electric shock or fire. 2

Стр. 2

English

❏ Shut down the product immediately if it produces smoke, a strange odor, or unusual noise. Continued use may cause electric shock or fire. When a fault or other problem occurs, immediately shut down the product and unplug the product. Then, contact your dealer or a Seiko Epson service center for advice. ❏ Shut down the product immediately if water or other liquid spills into this product. Continued use may cause electric shock or fire. Immediately unplug the product, and contact your dealer or a Seiko Epson service center for advice. ❏ Do not disassemble the areas other than those mentioned in this manual. ❏ Never repair this product.

Tampering with this product may result in injury or fire. ❏ Do not use this product in an environment where flammable gas or explosive gas may exist. Do not use aerosol sprayers containing flammable gas inside or around this product. Doing so may cause fire. ❏ Do not connect cables in ways other than those mentioned in this manual. Doing so may cause fire. It may also damage other devices. ❏ Do not touch the areas inside the product other than those mentioned in this manual. Doing so may cause electric shock or burns. ! CAUTION: ❏ Do not install/store the product in an unstable location or in a location subject to vibration from other devices.

Equipment may fall or collapse, causing breakage and possible injury. ❏ Do not allow anyone to stand or place heavy objects on top of this product. Equipment may fall or collapse, causing breakage and possible injury. ❏ Install the printer, cables and optional products in the proper direction according to the proper procedures. Failure to install correctly may cause fire or injury. Follow the instructions in this manual to install them properly. ❏ Be sure to disconnect all the cables from the product before you move it. Otherwise the cables could be damaged, potentially resulting in electric shock or fire.

Cautions on the Power Supply Read the manual supplied with the AC adapter carefully before using the accessory AC adapter. This product uses a listed power unit marked "Class 2" or "LPS," with the output voltage of maximum 1.5 A at DC 24 V. With the optional AC adapter (Epson AC adapter, C model: M235A or Epson AC adapter, C1 model: M235B), the output voltage is maximum 1.5 A at DC 24 V, and the input voltage is AC 100 V to 240 V. ! WARNING: Be sure to use the specified AC adapter (Epson AC adapter, C model: M235A or Epson AC adapter, C1 model: M235B). Using any other power supply could cause faults, fire or electric shock. 3

Стр. 3

English

Part Names and Functions Press this button to remove the printer. Lights when charging is proceeding normally. ( U "Charge LED does not turn on" on page 7 ) Lights/Flashes when an abnormality occurs. ( U "Charge LED is flashing" on page 7 ) For connecting the printer and battery. For connecting the AC adapter. ( U "Connecting the AC adapter" on page 5 ) 4 1 Release Button 2 Charge LED 3 Charge Terminal 4 DC-in Connector

Стр. 4