Lighting 31 Lighting Combined Light and Wiper lever 1. Rotate the lever to select the wiper speed. 2. Press the button at the end of the lever to use the washer fluid. Hazard Light Adjusting Headlamp Height* The headlamp height can be adjusted through the head unit. Press the headlamp button on the quick access menu on the head unit display to bring up the height adjustment settings. Adjust the headlamp illumination distance according to the vehicle load until the best lighting effect is achieved without causing glare. Set the height according to the following conditions: Press the button to activate turn on/turn off the hazard lights.
This vehicle features a combined lever for light, wiper, and washer. The light functions activated through this lever include: 0 = front seats occupied 1 = all seats occupied 2 = all seats and trunk compartment 1. Slide the lever up or down to activate the turn signals. 2. Pull the lever to temporarily turn on the high beams (as long as it is pulled). 3. Push the lever to switch the high beams on or off. occupied 3 = driver seat and trunk compartment occupied The wiper and washer functions can be activated by: