Introduction 3 ask a professional electrician to install the power charging circuit for you. The power charging circuit installation must be properly grounded, and the main switch as well as the leakage protection device must be installed. 4. Orange-colored cables in this server, our service personnel may contact you. We need your support and cooperation to avoid potential hazards. 8. Do not use tools with fake grounds General Information 1. This vehicle is an electric battery- powered vehicle (Battery Electric Vehicle/BEV), and some of its operations and characteristics differ from traditional fuel-powered vehicles. Therefore, please read the Manual carefully before using this vehicle. 2.
This vehicle is powered by electric that can pose a potential electrical shock hazard during charging. vehicle are high-voltage cables. Do not touch them. Pay special attention to the warning signs installed on the high-voltage component coverings. 5. When the driver's door is opened, CAUTION After vehicle delivery, please fully charge the Power Battery to 100% promptly before the power is lower than 30% to maintain Power Battery condition.. energy.
The vehicle is equipped with two batteries, one of which is the Power Battery located under the frame to provide power to the vehicle, and the other is a common 12V car battery located in the front compartment to provide power for instruments, lights, and relevant modules. 3. The Power Battery must be the vehicle will automatically enter high-voltage mode. Press the brake pedal to enter READY mode after the high voltage mode is active. 6. Once the vehicle enters high charged with 220V alternating current (e.g. common household power supply).
When charging the Power Battery with household alternating current, ensure that all cables, ports, and power charging path plugs have a load of not less than 10A (>2000W). Make sure to voltage mode, the main electrical system will be powered by the Power Battery, allowing you to use all vehicle features such as lights, A/C, and others. The Power Battery will start charging the 12V battery. 7. When we identify abnormal data from your vehicle on the back-end