1. Device Configuration (3) WiFi connection Personal computer (LinkManager and GateManager NX102-1200 Sysmac Studio installed, OS: Windows 10) Power supply Internet WiFi Ethernet cable LAN/ WiFi environment etc. WiFi access point SiteManager WiFi Power supply Hardware component list Precautions for Correct Use A web browser (hereinafter referred to as the "browser") is required for your personal computer. You can use browsers such as the one that comes standard with Windows. Precautions for Correct Use The devices with versions lower than those listed in the Hardware component list above are not covered by this guide.
To use the devices with models not listed in or versions higher than those listed in the Hardware component list , check for differences in specifications by referring to the manuals before operating the devices. Precautions for Correct Use Update Sysmac Studio to the version 1.41 or to a higher version. If you use a version higher than the one specified, the procedures and related screenshots described in Section 6 and the subsequent sections may not be applicable. In that case, use the equivalent procedures described in this guide by referring to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504).
Additional Information For information on the power supply specifications of NX102-1200, refer to the NX-series Startup Guide – Remote Access - RT1 Series - P151-E1-02 7 Manufacturer Name Model Version OMRON Controller NX102-1200 Ver.1.40 － Power supply (24 VDC for Controller) － OMRON Sysmac Studio SYSMAC-SE2□□□ Ver.1.41 OMRON Ethernet cable (with industrial Ethernet connector) XS5W-T421-□M□-K － Personal computer (OS: Windows 10, Web browser) －