1. Connection Procedure for Remote Access Startup Guide – Remote Access - RT1 Series - P151-E1-02 33 5 A confirmation dialog box appears. Confirm that there is no problem, and click Reboot. 6 The SiteManager reboot starts. The link to connect to the new address is displayed. 7 During the SiteManager reboot, set the IP address of the Ethernet port on Personal computer again to belong to the same subnet as the changed DEV1–DEV3 ports. In this image, the following values are set. ・IP address: 192.168.250.100 ・Subnet mask: 255.255.255.0 8 Check that the SiteManager reboot is completed. When completed the STATUS LED will be GREEN.