1. Connection Procedure for Remote Access 6.3.6. Agent Setup for the Controller Configure an agent for the target device (Controller) which is connected to the SiteManager. This process is called "Agent Setup". Startup Guide – Remote Access - RT1 Series - P151-E1-02 35 1 To make Agent Setup for Controller, click Fix for 5. Device Agents on the SETUP screen for SiteManager. 2 The dialog box on the right appears. Click New to configure an agent. 3 The Agent Setup screen appears. Enter a name for Controller management in the Device Name Field, e.g. NX01. Select Omron (manufacturer name) and the Ethernet PLC (device type) from the pull-down list in the Device Type Field.
Enter 192.168.250.1 (Controller IP address) in the Device IP & Parameters Field. Click Save.