1. Connection Procedure for Remote Access Startup Guide – Remote Access - RT1 Series - P151-E1-02 39 6 You are asked to change the password when you first time log in to GateManager using Certificate and one-time password provided in the email. Enter your pre-determined password in the New password and Repeat password Fields. Click Continue. *It is recommended that the password include The color of the New password Field indicates the alphanumeric characters with at least 12 upper and lower following states. case letters, numbers and Green: Your password meets the requirements. special symbols such as " . ", Yellow: Your password meets the requirements but is " , ", " ? ", " !
", " " and " “ ". weak. Red: Your password does not meet the requirements. *The password set here can be You need to re-enter a password that meets the used the next time you log in. requirements. If 48 hours have passed since you received the email, the one-time password provided in the email will no longer be valid. In that case, you can get a new one- time password by following the procedure in step 6 of 6.2.2. Password Setting for the GateManager Administrator. 7 Only when you first time log in, you are asked to accept the Terms of Use as shown in the figure on the right. Select the first checkbox to accept the Terms of Use.
If you wish to receive a copy of the Terms of Use via email, select the second box. Click Continue.