1. Connection Procedure for Remote Access 6.4.2. Connection Between the Personal Computer and the Controller Connect your personal computer and the Controller. Startup Guide – Remote Access - RT1 Series - P151-E1-02 41 1 Turn ON SiteManager and Controller. 2 Check that the GateManager login as a LinkManager user is completed and that "LinkManager: Ready" is displayed on the lower left side of the screen. *If you cannot log in to GateManager, click the URL for login as a LinkManager user, which is provided in the email in step 2 of the previous procedure. *If "LinkManager: Off" is displayed on the lower left side of the screen, start LinkManager by following step 8 of the previous procedure.
3 Expand the configuration tree on the left side of the screen, and select NX01 (Controller) as a target device. Click the Device Tab displayed on the right side of the screen, and then click Connect. 4 Check that Personal computer and NX01 (Controller) are connected and that "LinkManager: " is displayed on the lower left side of the screen.