7 ． EtherNet/IP Connection Procedure Precautions for Correct Use If you change the IP address and the subnet mask during the operation of Robot, the changed addresses are applied after power cycling Robot and Robot Controller. Precautions for Correct Use If Personal computer and Robot Controller do not exist on the same network segment, it is IP address and the subnet mask are not allowed to be changed. still possible to browse Robot Controller using Adept Robot IP Address Setting Tool, but, the Make sure that Personal computer and Robot Controller are on the same network segment, and then apply the changed addresses.
18 3 To start Adept Robot IP Address Setting Tool on Personal computer, select OMRON - Sysmac Studio - Adept Robot from the start menu. Select Adept Robot IP Address Setting Tool under Adept Robot. 4 Adept Robot IP Address Setting Tool starts. *The example on the right shows that the following addresses are set for eAIB Controller. Current IP Address: 172.16.127.103 Current Subnet Mask: 255.255.0.0