7 ． EtherNet/IP Connection Procedure Additional Information For details on online connections to Controller, refer to Section 6. Online Connections to a Controller of the Sysmac Studio Version 1 Operation Manual (Cat. No. W504). 33 7 Select Communications Setup from the Controller Menu. 8 The Communications Setup Dialog Box is displayed. Check that the Direct connection via USB Option is selected in Connection type. Click OK. 9 Select Online from the Controller Menu. A confirmation dialog box is displayed. Check the contents and click Yes. *The displayed dialog depends on the status of Controller. Check the contents and click on an appropriate button to proceed with the processing.
10 When an online connection is established, a yellow bar is displayed under the toolbar.