7 ． EtherNet/IP Connection Procedure 40 7 Select 0641 by pressing the Up, Down, Right, or Left Arrow Keys. Press F2 (Toggle). [F2] 8 Check that 0641 is ON (Green) as shown on the right. 9 In the same way as steps 7 and 8, turn 0643 ON (Green). *0641 is in the bit 0 position of the from Robot[480] variable. _ [F2] 10 Check with the Controller variable corresponding to the Robot Controller signals that turn ON in steps 7 to 9. The online value of the from Robot[480] variable is 05. _ It shows that the bits 0 and 2 of the from Robot[480] variable are ON, _ which correspond to the active signals in the DIGITAL OUTPUT Screen in step 9.