/ [REMOTE CONTROL] HC-X900M HC-X900 [ON]/[OFF] Please refer to page 52. [REC LAMP] [ON]/[OFF] / The recording lamp lights up during recording and flashes when the unit receives a signal from the remote control or when the Self-timer is counting down. HC-X900M HC-X900 HC-X800 The recording lamp lights up during recording and flashes when the Self-timer is counting down. When this is set to [OFF], it does not light during recording. [ALERT SOUND] / /[OFF] Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this sound. (Volume low)/ (Volume high) 2 Beeps for 4 times When an error occurs, follow the instructions displayed on the screen.
( l 150) You can change the operation icons displayed in the Touch Menu. Register 3 favorite operation icons. This function’s default settings are (Fade), (PRE-REC) and (Backlight Compensation) for Motion Picture Recording Mode, and (Built-in flash), (Self-timer) and (Backlight Compensation) for Still Picture Recording Mode. 1 Touch [SELECT OPERATION ICONS]. 2 Touch the operation icon you would like to change to cancel the setting. 3 Touch the operation icon to be set. Name of the function is displayed by touching and holding on the operation icon. To cancel, touch the operation icon again. 4 Touch [ENTER]. For details about the function of each operation icon, refer to page 60.
47 VQT4C76 [SELECT OPERATION ICONS]