To set the White Balance manually 1 Select , fill the screen with a white subject. 2 Touch and set the blinking . / When using the viewfinder, press and hold the CAMERA FUNCTION button. When the screen turns black instantly and the display stops flashing and then lights constantly, the setting is complete. If the display continues flashing, the White Balance cannot be set. In this case, use other White Balance Modes. HC-X900M HC-X900 FOCUS FOCUS WB WB MNL SHTR SHTR IRIS IRIS When the display flashes, the Manual White Balance previously adjusted is stored. Whenever recording conditions change, re-set the White Balance.
When setting both the White Balance and the iris/gain, set the White Balance first. is not displayed on the screen when is being set. Manual shutter speed/iris adjustment AWB AWB Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. / Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to Manual Mode. ( l 83) For how to perform the settings when using the viewfinder, refer to page 84. Press the iA/MANUAL button to switch to Manual Mode. ( l 83) 1 Touch [SHTR] or [IRIS]. 2 Touch / to adjust settings. Touch [SHTR]/[IRIS] to complete the adjustments. HC-X900M HC-X900 HC-X800 Shutter speed:
1/60 to 1/8000 If [AUTO SLOW SHTR (2D)] is set to [ON], the shutter speed will be set between 1/30 and 1/8000. If [DIGITAL CINEMA] is set to [ON], the shutter speed will be set between 1/48 and 1/8000. (When [AUTO SLOW SHTR (2D)] is set to [ON], the range is 1/24 to 1/8000.) The shutter speed closer to 1/8000 is faster. The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode. SHTR Iris/Gain value: CLOSE !# (F16 to F1.7) !# OPEN !# (0dB to 18dB) Value closer to CLOSE darken the image. Value closer to 18dB brighten the image. IRIS 85 VQT4C76