Preparation/Basic Basic Operations Shutter button (Taking pictures) The shutter button works in two steps. To take a picture, press it. Press the shutter button halfway to focus. A Aperture value B Shutter speed C Focus indication Aperture value and shutter speed are displayed. (It will flash in red if the correct exposure is not achieved, except when set to flash.) Once the subject is in focus, the focus indication is displayed. (When the subject is not in focus, the indication flashes) C A B 60 60 60 3.5 3.5 3.5 Press the shutter button fully (push it in further), and take the picture.
When the image is correctly focused, the picture will be taken, since the [Focus/Release Priority] is set initially to [FOCUS]. The focus range is different depending on the lens used. Even during menu operation or image playback, if you press the shutter button halfway, you can instantly set the camera ready for recording. [LVF] button (Switching the Monitor/Viewfinder) Press [LVF] to switch between the Monitor and Viewfinder. A [LVF] button B Eye sensor Press [LVF]. The monitor/viewfinder will switch as follows: Automatic viewfinder/ monitor switching Viewfinder display Monitor display (ENG) SQT0419 17 ロヷョ ヸ ョㄏビ ロヷョ ヸ ョㄏビ