Preparations/Basics Charging the battery The battery that can be used with this unit is DMW-BLG10PP. We recommend charging in a location where the ambient temperature is between 10 °C and 30 °C (50 °F to 86 °F) (same for the battery temperature). Insert the battery into the camera. Make sure that the camera is turned off. Charging lamp (Red) AC adaptor (supplied) To the electrical outlet USB connection cable (supplied) Computer Turn on the computer. [USB/CHARGE] socket This terminal is located at the bottom when the camera is in an upright position. Always check the direction of the socket, and hold the plug straight to insert or remove it.
(If the cable is inserted in the wrong direction, the socket could become deformed and cause faulty operation.) Also, do not insert into the wrong socket. Doing so may cause damage to this unit. 18 DVQX1803 (ENG)