Getting Started For assistance, please visit https://shop.panasonic.com/support 13 Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MEN REDIAL 2 MbN: Select the desired entry. 3 Press M N or MSP-PHONEN. Adjusting the receiver or speaker volume Handset Press either MDN or MCN on the navigator key, or MjN or MkN located on the side of the handset, repeatedly to select the desired volume while talking. Note: R If the receiver volume is set to level 5 (max.), it will be changed to level 4 in the next call. R Pressing the MBOOSTN key activates the volume booster feature. Use this key with care.
To prevent hearing damage, we recommend that you set this product to the lowest volume setting at which you can hear adequately. R If booster is set to on, it will be changed to off in the next call. Answering calls When a call is being received, the ringer indicator flashes rapidly according to its setting. (page 12) 1 Lift the handset and then press M N or MSP-PHONEN when the unit rings. 2 When you finish talking, press MOFFN or place the handset on the base unit or charger. Any key answer: You can answer the call by pressing any dial key (except 0 key). Auto talk: You can answer calls simply by lifting the handset. Temporary handset ringer off:
You can turn the ringer off temporarily by pressing M N (left soft key). Adjusting the ringer volume Handset Press either MDN or MCN on the navigator key, or MjN or MkN located on the side of the handset, repeatedly to select the desired volume while ringing. R To turn the ringer off, press either MCN or MkN repeatedly. Base unit Press MjN or MkN repeatedly to select the desired volume. R To turn the ringer off, press and hold MkN until the unit beeps. Volume booster This feature allows you to substantially increase the volume of the other party’s voice. This feature can be set for each unit. Volume booster is working under the following features: – Making call. – Answering call.
– Monitoring with a handset (Baby monitor). – Listening to message from handset (Answering system). 1 Press MBOOSTN while on a call. R The unit displays . 2 Press either MDN or MCN on the navigator key, or MjN or MkN located on the side of the handset,