Recording Videos Basic Video Operations If an operation such as a zoom or button operation is performed during video recording, that operation sound may be recorded. The lens operation sound (AF and image stabilizer) may be recorded to video. If the operation sound of pressing the video rec. button to end recording bothers you, try the following: Record the video about 3 seconds longer, and then divide the last part of the Use the Shutter Remote Control (DMW-RS2: optional) for recording. Depending on the type of card, the card access indication may appear for a while video using [Video Divide] in the [Playback] ([Edit Image]) menu. after video recording. This is not a malfunction.
Even when playback is performed on a supported device, situations may occur where image or sound quality is poor, recording information is not displayed If you experience any of these, play them back on the camera. Video recording is not possible while you are using the following functions: correctly, or playback is not possible, for example. [Time Lapse Shot] [Stop Motion Animation] For information about the high temperature display When the temperature of the camera rises, [ ] appears blinking on the screen.
If you continue to use the camera, a message indicating that the camera cannot be used is displayed on the screen and recording, HDMI output, and the streaming function will be stopped. Wait for the camera to cool down and for the message indicating that the camera can be used again. When the message indicating that it can be used again is displayed, turn the camera off then on again. 129