Introduction Before Use Splash Resistant Splash Resistant is a term used to describe an extra level of protection this camera offers against exposure to a minimal amount of moisture, water or dust. Splash Resistant does not guarantee that damage will not occur if this camera is subjected to direct contact with water. In order to minimize the possibility of damage please be sure the following precautions are taken: Splash Resistant works in conjunction with the lenses that were specifically Securely close the doors, contact points cover, etc. designed to support this feature. When the lens or cap is removed or a door is open, do not allow sand, dust, and moisture to enter inside.
If liquid gets on the camera, wipe it off with a dry soft cloth. Condensation (When the Lens, the Viewfinder or Monitor is Fogged Up) Condensation occurs when there are temperature or humidity differences. Take care monitor. If condensation occurs, turn off the camera and leave it for approx. 2 hours. The fog as this may lead to soiling, mold, and malfunctions in the lens, viewfinder, and will disappear naturally when the temperature of the camera becomes close to the ambient temperature. 20