Getting Started Charging the Battery To recover from [Sleep Mode], [Sleep Mode(Wi-Fi)], or [Power Save LVF Shooting], perform one of the following operations: Press the shutter button halfway. Set the camera on/off switch to [OFF] and then [ON] again. To recover from [Auto LVF/Monitor Off], press any button. 55 [Sleep Mode] Sets the amount of time until the camera is put to sleep. • The power consumption of the camera may increase when [Sleep Mode] is set to [OFF]. [Sleep Mode(Wi-Fi)] Sets the camera to sleep 15 minutes after being disconnected from Wi-Fi. • The power consumption of the camera may increase when [Sleep Mode(Wi-Fi)] is set to [OFF].
[Auto LVF/ Monitor Off] Sets the amount of time it takes for the viewfinder/monitor to turn off. (The camera is not turned off.) [Power Save LVF Shooting] Puts the camera to sleep when the recording screen is being displayed on the monitor when automatic viewfinder/monitor switching is active. [Time to Sleep] Sets the amount of time until the camera is put to sleep. [Method of Activation] Sets the screen where the camera is put to sleep. [Only Control Panel]: Puts the camera to sleep only when the control panel (Control Panel: 92) is displayed. [While Recording Standby]: Puts the camera to sleep from any screen during recording standby.