Getting Started Attaching a Lens Removing a Lens While pressing the lens release button (A), rotate the lens in the direction of the arrow until it stops and then remove it. (A) When you have attached a lens that does not have a communication function with this camera, after turning on the camera, a message asking for confirmation of the lens information is displayed. You can register the focal length for the lens information. ( [Lens Information]: 267 ) You can change the settings so that the confirmation message is not displayed: when you select [Yes]. You can also select from amongst already registered lens ( [Lens Info. Confirmation]: 604 ) Insert the lens straight in.
Inserting this at an angle to attach it may damage the camera lens mount. After removing the lens, be sure to attach the body cap and the lens rear cap. 63