Preparations We recommend attaching the shoulder strap when using the camera to prevent it from dropping. 1 Pass the shoulder strap through the hole at the shoulder strap eyelet Attach the shoulder strap so that the “LUMIX” Logo is on the outside. Attaching the Shoulder Strap Shoulder strap eyelet 2 Pass the end of the shoulder strap through the stopper 3 Pass the end of the shoulder strap through the hole on the other side of the stopper Pull the shoulder strap 2 cm (0.066 feet) or more. 4 Pull the shoulder strap and then check that it will not come out Perform steps 1 to 4 and then attach the other side of the shoulder strap. Use the shoulder strap around your shoulder.
– Do not wrap the strap around your neck. It may result in injury or accident. Do not leave the shoulder strap where an infant can reach it. – It may result in an accident by mistakenly wrapping around the neck. 17 DVQX2538 (ENG)