Preparations Charging the battery Use an AC adaptor (supplied/optional/commercially available) and USB connection cable (supplied/commercially available) to charge the battery. For charging, we recommend using the supplied AC adaptor or the AC adaptor (DMW-AC11: optional). The battery can be charged using a commercially available AC adaptor or USB connection cable. Recommended specifications for AC adaptors (commercially available) – Supports DC 5 V / 3 A (15 W) output – USB Type-C For charging, use a USB connection cable with an output of 15 W or higher. You can also use an AC adaptor of 5 V / 500 mA or higher for charging.
However, charging time may be longer than the recommended AC adaptor. We do not guarantee operations with all commercially available devices. The AC adaptor (supplied) and the USB connection cable (supplied) are dedicated accessories of this camera. Do not use them for other devices. Charge the battery using this camera and the specified method. Using charging methods other than those specified may result in fluid leakage, overheating, combustion, rupturing, etc., and these may cause injury. About the battery pack The battery that can be used with this unit is DMW-BMB9PP. This battery may present a risk of fire or chemical burn if mistreated.
To ensure that safe products are used, we recommend that a genuine Panasonic battery pack is used. There is a possibility that other battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. 19 DVQX2538 (ENG)