Preparation Rear Dial/Front Dial Rotating: Selection of items or setting of values is performed during the various settings. This Owner’s Manual describe operations of the rear dial/front dial as follows: Allows you to set the aperture, shutter speed, and other settings when in / / / modes. In [Dial Set.] in the [Custom] menu, you can change the operation methods of the front dial and rear dial. (P104) Pressing the cursor button: Selection of items or setting of values etc., is performed. Pressing [MENU/SET]: Confirmation of setting contents, etc., is performed. This Owner’s Manual express the up, down, left, and right of the cursor button as 3 / 4 / 2 / 1 . (ENG) VQT5H68 23 e.g.:
When rotating the rear dial to the left or right e.g.: When rotating the front dial to the left or right Mode dial Rear Dial Front dial Program Shift Aperture value Shutter speed Shutter speed Aperture va Control Dial of values etc., is performed. trol dial is illustrated as below in trol dial to the left or right: Cursor buttons/[MENU/S ET] button