Recording Taking Pictures using Auto Bracket Applicable modes: 1 Set the drive mode dial to [ ]. 2 1 2 Press 3 / 4 to select [Single/Burst Settings], [Step] or [Sequence] and then press [MENU/SET]. 3 Press 3 / 4 to select the setting and then press [MENU/SET]. Exit the menu after it is set. Taking Pictures with the Self-timer Applicable modes: 1 Set the drive mode dial to [ ]. 2 Press the shutter button halfway to focus and then press it fully to take the picture. Focus and exposure will be set when the shutter button is pressed halfway. After the self-timer indicator flashes, recording starts. Changing the time setting for the self-timer 1 Select the menu.
(P28) MENU > [Rec] > [Self Timer] 2 Press 3 / 4 to select the mode and then press [MENU/SET]. Picture is taken 10 seconds after shutter is pressed. After 10 seconds the camera takes 3 pictures at about 2 seconds intervals. Picture is taken 2 seconds after shutter is pressed. When using a tripod, etc., this setting is a convenient way to avoid the jitter caused by pressing the shutter button. Exit the menu after it is set. 42 VQT5H68 (ENG) Focus on the subject and take a pict • If you press and hold the shutter button, the n pictures that you set is taken. • The Auto Bracket indication blinks until the nu pictures that you set is taken.
hanging the settings for [Single/Burst Settings], Select the menu. (P28) MENU > [Rec] > [Auto Bracket] ure um mb [Ste . FHM DO 2V 4p4:3L AFS ber of er of p] and [Sequence] in Auto Bra FHM DO 2V 4p4:3L AFS cket