Recording Taking Pictures with Your Favorite Settings (Program AE Mode) Recording Mode: The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. You can take pictures with greater freedom by changing various settings in the [Rec] menu. 1 Set the mode dial to [ ]. 2 Press the shutter button halfway and display the aperture value and shutter speed value on the screen. A Aperture value B Shutter speed If the exposure is not adequate when the shutter button is pressed halfway, the aperture value and shutter speed turn red and blink.
B A Program Shift In Program AE Mode, you can change the preset aperture value and shutter speed without changing the exposure. This is called Program Shift. 1 Press the shutter button halfway and display the aperture value and shutter speed value on the screen. 2 While the values are displayed (about 10 seconds), perform Program Shift by rotating the rear dial or front dial. C Program Shift indication To cancel Program Shift, turn off this unit or rotate the front/ rear dial until the Program Shift indication disappears. C (ENG) VQT5H68 51 2.860 0 2 98 ure value and shutter S S 250 125 60 30 15 F 2.8 4.0 5.6 8.0 4.060 0 200 98