Operation Using the Microwave for the First Time Setting the Clock Setting the Child Safety Lock 1 4 1 1 Display Window Plug into a properly grounded electrical outlet. The oven automatically defaults to the imperial measure system (oz/lb). With the oven NOT cooking, press Timer/Clock twice; the colon will blink. Enter time of day using the Time Buttons . Press Stop/Reset to confirm; a colon (:) will appear in the display window. When the time of day appears in the display, press Start three times; “ ” will appear in the display. 2 2 NOTES: These choices can be selected only when you plug-in the oven. 2 Press Timer/Clock to finish setting and the colon (:) will stop blinking.
Press Start once, then Press Timer/Clock to cycle between the weight system, Metric ( g / kg ) or Imperial (oz/lb). Press Stop/Reset three times; the display will return to the time of the day and Child Safety Lock will be cancelled. NOTES: 1. To reset the clock, repeat 3 steps. 2. The clock will retain the NOTES: 1. This feature prevents the time of day as long as the oven is plugged in and electricity is supplied. 3. The clock is a 12-hour electronic operation of the oven until cancelled. It does not lock the door. 2. To set or cancel Child display. 4. Oven will not operate while Safety Lock, Start or Stop/ Reset Button must be pressed 3 times within 10 seconds. 3.
You can set Child Safety colon (:) is flashing. Press Start once, then Press Timer/Clock to cycle between the Beep on or Beep off. Lock feature when the display shows a colon or time of day. 11