Location of Controls 12 12 14 15 11 13 1 External Air Vent 2 Internal Air Vent 3 Door Safety Lock System 4 Exhaust Air Vent 21 Auto Defrost Pad (See page 14) 22 Serving/Weight Pad (See page 15) 23 Quick 30 Pad (See page 13) Stop/Reset Pad is pressed once during oven operation, Start Pad must be pressed again to restart oven.
5 Control Panel 6 Identification Plate 24 More Pad 25 Less Pad (See page 13) (See page 13) 31 Door Open Pad (See page 6 ) 7 Glass Tray 8 Roller Ring 9 Heat/Vapor Barrier Film (do not remove) 10 Waveguide Cover (do not remove) 11 Door Release Button 12 Warning label 13 Menu label 14 Power Supply Cord 15 Power Supply Plug 16 Display Window 17 Popcorn Pad (See page 13) 18 Auto Reheat Pad (See page 15) 19 Auto Cook Pad (See page 15) 20 Power level Pad (See page 11) 26 Number Pads 27 Cooking/Timer Pad (See page16) 28 Clock Set Pad (See page 11) 29 Stop/Reset Pad Before cooking: One tap clears all your instructions. During cooking: one tap temporarily stops the cooking process.
Another tap cancels all your instructions, and time of day or colon appears in the display window. 30 Start Pad After cooking program setting, one tap allows oven to begin functioning. If door is opened or Beep Sound: When a pad is pressed correctly, a beep will be heard. If a pad is pressed and no beep is heard, the unit did not or cannot accept the instruction. When operating, the oven will beep twice between programmed stages. At the end of any complete program, the oven will beep 5 times. NOTE: If no operation after cooking program setting, 6 minutes later, the oven will automatically cancel the cooking program. The display will return to clock or colon display. 10