To display the Touch Menu The Touch Menu will disappear when no function is performed for a specific period of time during Recording mode. To display it again, touch . Do not touch on the LCD monitor with hard pointed tips, such as ball point pens. Perform the touch screen calibration when the touch is not recognized or wrong location is recognized. ( l 46) When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. 1 Select the menu. ( l 39) 2 Touch the date or time to be set, then set the desired value using / . A Displaying the World time setting ( l 41):
[HOME]/ [DESTINATION] The year can be set between 2000 and 2039. The 12-hour system is used to display the time. 3 Touch [ENTER]. A message prompting for World time setting may be displayed. Perform the World time setting by touching the screen. ( l 41) Touch [EXIT] to complete the setting. The date and time function is driven by a built-in lithium battery. When this unit is purchased, the clock is set. If the time display becomes [- -], the built-in lithium battery needs to be charged. To recharge the built-in lithium battery, connect the AC adaptor or attach the battery to this unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and time for approx.
6 months. (The battery is still being recharged even if the unit is off.) 27 VQT3K35 Preparation Setting date and time MENU : [SETUP] # [CLOCK SET]