Getting started If the wireless router supports the PUSH button method* 2 ; You can connect to and configure the security settings of your wireless LAN device with ease by pressing the Link button on the router. Firmware Update 3 Do you want to start firmware update? For the update information, please visit the following website: http://panasonic.net/support/ Current Version: X.XX New Version: X.XX If your wireless network is encrypted; Enter your encryption key (password). You can switch between capital and lower case letters by pressing the “Shift” key. No Yes OK RETURN Select “Yes” to start downloading the firmware.
When the firmware update starts after the downloading is finished, a black screen is displayed. Encryption Key (Password) l Shift 1 You cannot operate the unit until the update is complete. Don’t remove the AC power supply cord during the update. Removing the AC power supply cord while the update is in progress may damage the unit. Space OK RETURN (QWHUFDVHVHQVLWLYH After the firmware is installed, unit will restart and the following screen will be displayed. In your use of internet functions You must agree to the terms of use for the Internet function and the privacy policy. ( > 36, “Legal Notices”) Refer to the owner’s manuals of the hub or router.
Do not use this unit to connect to any wireless network for which you do not have usage rights. Using these networks may be regarded as illegal access. If you have trouble getting online on your PC after performing network settings on this unit, perform the network settings on your PC. Please be aware that connecting to a network without encryption may result in the leaking of data such as personal or secret information. update the firmware. https://panasonic.jp/support/global/cs/ (This site is in English only.) To show the firmware version on this unit. ( > 36, “Firmware Version Information”) Downloading will require several minutes.
It may take longer or may not work properly depending on the connection environment. *3 “X.XX” represents the firmware version number. *1 An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices. *2 The PUSH button method is a connection method which allows you to set encryption for a wireless LAN connection with ease. You can connect to a wireless LAN network by pressing a certain button on the wireless access point [Link button, WPS (Wi-Fi Protected Setup TM ) button, etc.]. You can operate the TV using the unit’s remote control.
1 Input the 2-digit code ( > 46) while pressing [ Н ] of TV operation button on the remote control. e.g., 01: [0] B [1] 2 Test by turning on the television. Firmware updates This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection. When a new firmware version is available, the following message is displayed. If your television brand has more than one code listed, select the one that allows correct operation. - 19 - 2 3 4 5 6 7 8 9 0 Backspace . # “ / : ~ _ @ - , ; * ` The firmware was updated. Current Version: x.xx can also download the latest firmware from wing website and store it to a USB device Reprogramming the remote control