Recording Modes Taking Pictures with Your Favorite Settings (Program AE Mode) Recording Mode: The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. You can take pictures with greater freedom by changing various settings in the [Rec] menu. 1 Set the mode dial to [ ]. 2 Press the shutter button halfway and display the aperture value and shutter speed value on the screen. If the exposure is not adequate when the shutter button is pressed halfway, the aperture value and shutter speed turn red and blink. 3 While the values are displayed (about 10 seconds), perform the Program Shift by rotating the rear dial.
It will switch between Program Shift operation and Exposure Compensation operation (P44) every time the rear dial is pressed while the values are displayed. The Program Shift indication A appears on the screen. To cancel Program Shift, turn the camera off or rotate the rear dial until the Program Shift indication disappears. SS SS SS F 250 15 30 60 125 2.8 8.0 4.0 5.6 A 60 60 60 4.0 4.0 4.0 2 00 0 98 98 98 MENU Displaying/not displaying the exposure meter > [Custom] > [Expo.Meter] > [ON]/[OFF] When [Expo.Meter] is set to [ON], the exposure meter B will be displayed when performing Program Shift, setting the aperture value or adjusting the shutter speed.
Unsuitable areas of the range are displayed in red. When the exposure meter is not displayed, switch the display information for screen by pressing [DISP.]. (P24) The exposure meter disappears after approximately 4 seconds if no operation is performed. SS SS SS F 60 60 60 4.0 4.0 4.0 2 00 250 15 30 60 125 2.8 8.0 4.0 5.6 0 98 98 98 B (ENG) SQT0196 31