PanelScan Integration Guide Filtering Some boards may have multiple symbols within the read area, but only one symbol is used for tracking. The Filtering dialog allows you to configure the system to report only the correct symbol in the output string. Number of Possible Codes on Each Board – This tells the system that there could be multiple symbols on each board. This should be set to the maximum number of symbols so the system is sure to read all of them. Filters – The eight check boxes represent the filters. You can apply multiple filters simultaneously. The filter must be checked and then configured as needed. Filter example:
If you know that the correct symbol data will always start with FIS and will always be 10 characters long , you can check the boxes Correct Code Must Start With and Correct Code Must Be N Characters Long , and then configure them accordingly. 24 Copyright © 2019 Omron Microscan Systems, Inc.