PanelScan Integration Guide Comm Setup This tab contains four groups of radio buttons to control Baud Rate , Parity , Data Bits , and Stop Bits . Baud Rate – Sets the rate at which the system and the host transfer data back and forth. This setting can be used to transfer data faster or to match host port settings. Parity – An error detection routine in which one data bit per character is set to 1 or 0 so that the total number of bits in the data field is either even or odd. This setting is only changed if necessary to match the host setting. Data Bits – The number of bits in each character. This setting is only changed if necessary to match the host setting.
Stop Bits – One or two bits added to the end of each character to indicate the end of the character. This setting is only changed if necessary to match the host setting. Customized Serial Output – Allows the user to define preamble, postamble, and delimiter characters. 30 Copyright © 2019 Omron Microscan Systems, Inc.